DIY-EFI LSU 4.9 Wideband AFR Lambda Sensor
£50.00 exVAT⠀⠀£60.00 incVATA DIY-EFI Branded LSU 4.9 Wideband Sensor
Showing 37–48 of 80 resultsSorted by price: high to low

A DIY-EFI Branded LSU 4.9 Wideband Sensor

What’s In The Box Gaggiuino 4.3″ ESP32 Screen with preloaded firmware Custom screen harness cable, 2 small connector for screen to 1 larger connector for PCB 3D printed parts not included. The official supplier of those parts is EspressIO

A modern OEM 4 cylinder waster spark coil pack with inbuilt coil drivers


A Bare DIY-EFI TinyWB module


The DIY-EFI developed ECU simulator board


Easily add Bluetooth to your CORE4 ECU


A valve to add boost control to your aftermarket ECU.


A Hammond aluminium enclosure that is the correct size for the Speeduino 0.4 series of board.
The colour will be silver or black, stock depending.


Everything you need to update an existing Gaggiuino installation to the pressure block sensing method. 1 x CNC Pressure tap block 1 x Pressure sensor fitting 1 x M5 pressure block fitting 1 x 8CM PTFE Pipe (Enough for 2 attempts) 2 x Pressure block o-rings (red) 2 x Pressure sensor o-rings (white) 2 x…

The headless module connects to your main Gaggiuino PCB in place of a screen. This is done using the 4 pin screen connector on your main PCB, and plugging the module in via the included cable. The onboard WiFi interface allows you to view and control all aspects of the Gaggiuino mod from your own…


Bosch 211 Style ignition driver


Bosch 203 style ignition driver
No products in the basket.