-
Assembled DSC Dual Signal Conditioner (Speeduino VR)
£18.00 exVAT⠀⠀£21.60 incVATRead moreA plug in module to allow your ECU to condition the AC signal from a VR Crank/Cam sensor to DC for your ECU.
MEGA 2560 R3 Board ATmega2560 ATMEGA16U2
£16.00 exVAT⠀⠀£19.20 incVATAdd to basketAn Arduino Mega board, key for any Speeduino build.
Gaggiuino Dual Scales PCB
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketNon Returnable – experiment prototype sample – For research & development purpose
Mazda MX5 Mk1 1.8 (NA8) AFM MAF Delete harness
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketAids a nice clean install of an IAT sensor in place of the factory MAF on a NA6 MX5
M12x1.5 2 Pin Air Temperature Sensor
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketA M12x1.5 Air temperature sensor.
3/8 NPT 2 Pin Coolant Temperature Sensor
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketA 3/8 NPT Coolant sensor.
M12x1.5 2 Pin Coolant Temperature Sensor
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketA M12x1.5 Coolant sensor.
1/8 NPT 2 Pin Coolant Temperature Sensor
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketA 1/8 NPT Coolant sensor.
Mazda MX5 Mk1 1.6 (NA6) AFM MAF Delete harness
£15.00 exVAT⠀⠀£18.00 incVATAdd to basketAids a nice clean install of an IAT sensor in place of the factory MAF on a NA6 MX5
Low Volatge Wiring Kit
£12.00 exVAT⠀⠀£14.40 incVATAdd to basketIncludes:
1 x Switch Panel to PCB cable
1 x SSR to PCB cable.Screen cable is not included, that is included with purchase of a screen or full kit.
CORE4 TE36 Connector Plug Kit
£12.00 exVAT⠀⠀£14.40 incVATAdd to basketIdeal spares if you want to rework your harness
UA4C Speeduino Connector Plug Kit
£12.00 exVAT⠀⠀£14.40 incVATAdd to basketIdeal spares if you want to rework your harness
Sale!DIY-EFI T-Shirts
Original price was: £18.00.£10.00Current price is: £10.00. exVAT⠀⠀£12.00 incVATSelect optionsSupport DIY-EFI & be the coolest kid on the block at the same time
The UK's official Speeduino distributor
