Description

This kit includes most of the parts needed to complete an installation on a Gaggia Classic (NOT Gaggia Classic PRO).

The low voltage wiring kit means connecting the pressure sensor, screen, SSR and switches is just a case of plugging them in.
You will need to fabricate your own high voltage wiring.

BLACKPILL FULLY SOLDERED
BLACKPILL & SCREEN PROGRAMMED

KIT INCLUDES

• Official Gaggiuino V3 PCB – Professionally produced PCB, with all required components installed and soldered to both sides of the board.
• Blackpill
• 2.4″ Screen HMI Touchscreen (TJC Blue PCB)
• Low voltage wiring kit (Screen cable, SSR cable, Switch panel cable)
• Pressure Sensor (with custom quick connect harness)
• O-Ring for Pressure Sensor Adapter
• Thermocouple K – M4
• Transducer Fitting  ( 6mm-G1/4)
• T-fitting – PE 6mm
• PTFE Tube 20 cm ( ID 4mm OD 6mm )
• SSR  40DA
• USB STLink Tool

Options available.

• Dual Scales PCB. Only needed if you plan to add physical scales to your build. Populated dual Scales (HX711). This eliminates the need to purchase two HX711 boards, you still need load cells.
• ToFnLED Kit. Add water level monitoring and an RGB LED.

Installation resources can be found HERE

PCB colour may vary, current stock includes black and purple.